Blog – Page 9 – Roofing

Dec12

Roofing Blog

Roof Ventilation: Vent Types and Importance

Why does a roof require vents? And why is it that roofs have different types of vents? Well, here we will go over the importance of roof ventilation, ventilation types, and the pros and cons of different types of vents.

Good ventilation systems extend the lifetime of the roof and can reduce the energy consumption and cost of the structure! There are two types of ventilation: exhaust (letting out stale air) and intake (bring in fresh air). Ideally, a roof will have both types of ventilation, but occasionally the architecture of the home will allow only for exhaust, but not intake. Although having both is best, just exhaust is better than nothing at all.

Why is exhaust ventilation important? This is because hot air rises and contains moisture. This is an issue in any climate, but especially in a warm one like what we have in Florida. If hot, moist air is allowed to stagnate in the attic, it will lead to mildew and mold problems which will compromise the wood framing and decking of the roof. To prevent this, exhaust vents are installed at the top of the roof, most often on the ridges, to release this hot air.

Why is intake ventilation important? It’s important because while hot air rises, it is helped if cooler air is taken in to push it up. Intake vents are installed along the eaves of the roof, usually in the soffit, to take in cool air and push the hot air up through the exhaust vents.

Unventilated or improperly ventilated roofs can lead to major, expensive problems such as poor indoor air quality, overburdened air conditioning systems, moisture in the attic space, and dry rot of roof sheathing. Although this is not a problem in Florida, in colder climates ice dams can also form on roofs in the winter months, straining the roof framing and wearing down the material covering the roof.

So what are the different types of vents? Well, there are 7 common types of exhaust vents and 4 types of intake vents. We will start with the exhaust.

Types of Exhaust Vents

Ridge Vents: These are the most common and effective type of exhaust vent. They are installed across the peak or ridge (hence the name) of a roof, allowing the rising hot air to exit out of the highest point. Ridge vents usually run across the entire peak of the roof, or even across multiple ridges, if the roof is large enough to have these. This allows for maximum surface area for the hot air to escape. Ridge vents are installed over a 2 inch gap that is cut in the roof decking at the peak of the roof. They come in two main types: aluminum and shingle-over.

Off Ridge Vents: These types of vents are smaller than ridge vents. They vary in size from 2 feet to 8 feet, but the most common type is 4 feet across. They are typically installed about one foot below the ridge line, after a hole the size of the vent is cut in the roof sheathing. While off ridge vents are not as effective in letting out the hottest air as ridge vents–because they sit below the very top of the roof and have a smaller surface area–they are often chosen for more complex roofs, roofs with short ridge lines, or as auxiliary exhaust venting on roofs that do also have ridge vents.

Box Vents: These are also called turtle vents, since their raised box shape somewhat resembles the shell on a turtle’s back. They are quite similar to off ridge vents and come with both the same drawbacks and advantages. The difference between the two mainly lies in the shape: off ridge vents are elongated, but box vents are square, usually sized 18 inches by 18 inches. These are typically installed in bunches on roofs with short ridges or as auxiliaries in areas of the roof that require ventilation but are not suitable for a ridge or off ridge vent.

Hard-Wired Powered Attic Vents: These are electric propelled fans that help to pull stale air out of the attic space. They are hard-wired into the home’s electrical system and rely on it for their function. There is some debate over the effectiveness of powered attic fans, but they do provide some exhaust ventilation. What is definitive is that their constant use of electricity does raise the home’s electric bill. Another issue is that in air-conditioned homes the powered fans can pull the cooler air from the house’s interior, which raises the AC costs.

Solar Powered Attic Vents: Solar powered attic vents are exactly like the hard wired power vents, except that they get their power solely from a solar panel attached to the vent. This removes the increased electricity cost, but does not eliminate other issues. Like the hard-wired power vents, they are often either too powerful or not powerful enough to function efficiently with the roof’s ventilation system.

Roof Turbines: This is a device that consists of aluminum blades within an aluminum cowl. The blades rotate due to wind movement and pull air from out of the attic and distribute it to the exterior. The upside is that they are eco-friendly and quiet even on very windy days. The downside is that because they are small, many would be needed to ventilate a whole roof. Additionally, they require winds of at least 5 or 6 mph to function properly, which means they provide no ventilation at all on still days.

Cupola Vents: Cupola vents are unique, rare, and expensive. They are, however, often quite beautiful and add to a home’s aesthetic. They were originally created to allow a lot of air into a barn to help dry hay and other crops. They act as both exhaust and intake. They come in many shapes and sizes and often feature quite elaborate decorative features. Another positive to cupola vents is that they allow more light into the home.

Types of Intake Vents

Soffit Vents: This is by far the most common and effective type of intake ventilation. Soffit vents are installed directly on the eaves of the roof (or the “roof overhang”) to provide continuous ventilation around the roof’s perimeter. Soffit is typically made of vinyl or aluminum and can be continuous or individual.

Gable Vents: These are usually round or triangular vents just below the peak of a roof’s gable. They function partially as intake and partially as exhaust vents in a horizontal cross-ventilation system where air flows in one side of the attic and out of the other. This is alright, but less effective than the vertical cross-ventilation of soffit and ridge vents.

Over Fascia Vents: These vents are placed at the top of the fascia board and below the first row of wood covering. They are less effective than soffit vents because the intake surface area is decreased; however, they are very useful in cases where the size of the eaves’ overhang does not allow for soffit venting.

Drip Edge Vents: These are very similar to over fascia vents. The only difference is placement, as they are either part of or added to the roof’s drip edge. The drip edge is a metal strip that is attached at the edge of the roof to direct water drainage off the side or into the gutters.

We hope this post has shown you the ins and outs of roofing ventilation. As always, for all your roofing needs in Flagler, Palm Coast, Bunnell, Daytona Beach, and Deland call Florida’s Best Roofing at 386-263-7906 for a free estimate!

Dec7

Roofing Blog

Rare and Unusual Roof Shapes

In our last post we discussed some of the most common roof shapes and styles in the United States (and really across the world). This time we will provide you with information on rare and unusual roof shapes. These shapes are all unique and most often chosen for aesthetic reasons, heightening the impact of a structure’s style. Due to their unique qualities, these types of roofs are often more expensive to repair and replace since they require contractors with very specialized knowledge and skills. Below we discuss nine of these roof shapes.

Bonnet: Bonnet roofs can be like either gambrel or mansard roofs (see our previous post for these), only in reverse. There are two panes on each side, with different slopes. Instead of the upper panes having a lower slope and the lower a steep slope, as is the case with gambrel and mansard roofs, bonnet roofs have steep upper panes and low sloped bottom panes. Bonnet roofs can have two sides (like a spruced-up gable roof) or four sides (like a hip roof). Bonnet style roofs are popular in particular geographic areas such as Cape Cod and other places in the Northeast, but fairly rare elsewhere.

Saltbox: Homes with saltbox roof styles gained popularity in colonial America, but examples can still be seen today across the country and elsewhere. Saltbox roofs have two sides, like a gable shape, but what makes them unique is that these sides are not equal or symmetrical. The two sides meet at the top ridge, but drop down unequal distances. In fact, one side is significantly shorter than the other, but equal in width. Most frequently, the slope also differs between the two sides. One side usually has a much steeper slope than the other side. Either the short or the long side may be steep.

Butterfly: A butterfly roof is a striking shape arising out of contemporary architecture. It is essentially the reverse of a gable roof, the result of which resembles the shape of the insect that lends its name to this roofing style. While two sides rise up to a ridge in a gable roof, the two sides of a butterfly roof actually slope down into a central valley. As you can imagine, this can easily lead to water retention issues and snow pile ups in colder environments, if special care is not taken to ensure positive drainage and snow is not regularly cleared.

Sawtooth: Sawtooth roofs are similar to butterfly roofs in that they have central valleys created by two sides sloping down. However, sawtooth roofs differ in that their valleys are created due to the repetition of components sloping up and then down, which results in a facade resembling the teeth of a saw. The repeating components can be straight or curved and can vary in slope–the only requirement is that they repeat exactly several times. This is a style most often seen in commercial roofing, and as with butterfly roofs, special care must be taken to ensure proper drainage.

Curved: Curved roofs provide a contemporary stylistic alternative to the straight lines seen in all traditional roofing styles. They give a structure a modern, sleek look, but require specialized skills and materials to install. Creating and designing such shapes requires experienced architects, structural engineers, and specialized contractors, which make them expensive to build and maintain, but the aesthetic possibilities are endless!

Pyramid: Almost five thousand years ago the ancient Egyptians figured out that the pyramid shape gives stability to structures of almost any size. The fruits of their labors are still standing today! The balance of weight and tension makes pyramid shapes and pyramid shaped roofs very strong. In this, pyramid roofs are closely related to hip roofs; in fact, they are a subset of hip roofs in which all four sides have equal dimensions and slope.

Jerkinhead: These are also called half-hip roofs. The origin of this terminology becomes clear with a quick glance (or in this case description) of the jerkinhead roof’s shape. The half-hip or jerkinhead roof has four sides. Two are just like those of a gable roof that meet at the top ridge. At both ends of the ridge you will then find a very short hip. This roof shape has the advantage of strength and stability provided by the hip elements and an old-world aesthetic.

Skillion: Skillion roofs are made of one sloped pane. The slope can be steep or low and the shape closely resembles a lean-to. This does not mean, however, that a skillion roof looks cheap or simple. Homes and other structures with skillion roofs often have two or more skillion roofs at varying elevations which give a very contemporary, modern, look and provide opportunities for more windows which allow for a brightly lit interior.

Dome: Dome roofs look exactly like you might imagine: essentially the roof is in the shape of half of a sphere. The force distribution in these roofs, if properly constructed, makes them incredibly strong and long-lasting. This is borne out by the fact that some dome-roofed structures, like the Pantheon in Rome, are still standing after thousands of years under the original roof! For a closer example, you might want to imagine the Capitol building in Washington D.C. Dome roofs are rarely seen in residential structures and require very specialized architects and structural engineers for their construction.

We hope this post has opened your eyes to the variety of shapes and styles that are out there in roofing. As always, for all your roofing needs in Flagler, Palm Coast, Bunnell, Daytona Beach, and Deland call Florida’s Best Roofing at 386-263-7906 for a free estimate!

Nov21

Roofing Blog

Roof Styles & Shapes

Have you ever wondered about why your roof is shaped the way it is? Why is it different from a neighbor’s roof? Whether those differences matter and where they come from? Well here you’ll find the answers. Below we look at some of the most popular roof shapes and their unique aspects.

Gable Roofs

Gable roofs are the most common type of roofing style installed today. They have a simple and classic look, giving the roof a triangular shape when viewed from the front or the back. This type of roof rises up from the eave to the ridge on one side and then goes down from the ridge to the eave on the other.

Gable roofs can look very different from one house to another because they vary in slope. Low sloped gable roofs give a structure a flatter look while high sloped roofs are steeper and taller. As with most roofing styles, gable roofs also vary because most modern structures do not have just one roof, but instead a main roof with multiple sub-roofs. The ways that the main roof and sub-roofs are combined allows for much versatility.

Hip Roofs

Hip roofs are the second most common style of roof for modern residential structures in America today. They have both advantages and disadvantages in comparison to gable roofs. In fact, it is also quite common to see combinations with a main hip roof and gable sub-roofs, or the other way around.

Hip roofs’ main advantage is in their strength. Unlike a gable roof, which only has two sides, a hip roof goes down from the ridge to the eave on all four sides. The intersection of all four sides at the top allows for greater stability and balance.

The downside is that hip roofs can be more expensive to replace, because they have a greater surface area. This is, of course, in a comparison of two houses of the same size.

Like gable roofs, hip roofs can look very different from one house to the next because they can also vary in slope, from relatively flat to steep. In any case, a house with a hip roof and only hip sub-roofs has a square look, since it lacks the triangle created by the gable.

Gambrel Roofs

Gambrel roofs have a very distinct aesthetic, similar to Mansard roofs, discussed below. They were very popular in past centuries and can be found particularly in the Northeast. They are also sometimes called Dutch roofs.

A gambrel is similar to a gable in that both roofing styles only slope on two sides of the house, leaving the other two sides with siding or stucco going up to the roof pitch. The difference in gable and gambrel is that the latter has two panels, with different slopes, on each side. The two panels that join up at the ridge usually have a lower slope, and then two further panels are attached to these with a steeper slope. This gives the house an overall curved look, without actually having a rounded roof.

Just like gable and hip roofs, gambrel roofs are most often covered with asphalt shingles, although metal roof covering is also an option.

Mansard Roofs

In a way, a mansard roof is to a gambrel as a hip roof is to a gable. Basically, a mansard is a gambrel roof, but with four sides. Each of the four sides has two panels, with the top four panels, which intersect at the top ridge, having a fairly low slope, and the attached lower four panels having a very steep slope.

Mansard roofs can have an overall boxy look, but this is mitigated by certain factors. For one, they often have dormers, windows with small gable shaped roof coverings, that jut out from the steep sections of the roof. The dormers lend this French style shape a certain amount of elegance, making it very popular in complex, historic homes. Due to the steep slope of the secondary panels, mansard roofs also allow for a great deal of attic space, or even the top story to be housed within the slopes of the roof!

The disadvantage of a mansard roof is its expense. This results from the complexity of the roof shape, the high slope, the high surface area, and often the delicate nature of working on historic structures. Furthermore, the roofing materials for mansard roofs can be more expensive. Traditionally, mansard roofs were covered with slate, the most expensive and longest lasting type of roofing material. In the modern day, cheaper asphalt shingles are more commonly used, but this can pose a problem of its own. Shingles are great for the steep panels of a roof, but the four low-sloped mansard panels are better suited for flat roofing materials. This results in a choice between a properly covered un-matched roof, or a matched fully shingle roof, which is not as effective in the low-sloped areas.

Flat Roofs

Flat roofs are most common in commercial roofing, but can also be seen on some residential structures, particularly in urban areas.

Flat roofs should never be completely flat, but their slope is so close to negligible that it is essentially not noticeable by the naked eye. Due to this, to prevent water retention, flat roofs require well functioning drainage systems, as well as special roofing materials that stand up to frequent and consistent water exposure better than standard asphalt shingles or tile.

Flat roofing materials must stand up to water exposure, beating from rain, and being walked on. They must be completely watertight, as leaks in flat roofs are very difficult to find and even more difficult to repair effectively.

These are the most commonly used flat roof materials: PVC membrane, TPO membrane, EPDM rubber membrane, rolled roofing, and gravel and tar.

In the Flagler, Deland, and Daytona Beach area hip and gable are the most common roofs in residential construction and flat roofs in commercial. Whatever your roofing style, if you have any roofing concerns call Florida’s Best Roofing at (386) 263-7906!

Nov14

Roofing Blog

5 Reasons to Choose Florida’s Best Roofing for All your Roofing Needs

Whether you are looking to repair or replace the roof of your home or business, the search for the right contractor can be confusing and stressful. A roof is an integral part and the first defense of any structure, which is why it is of the utmost importance that its repairs or replacement are handled by competent professionals. If you are located in the Flagler or Volusia county areas, we invite you to consider Florida’s Best Roofing for all your roofing needs.

Service and Experience

We are a local company with over 15 years of experience in the roofing business. Our employees are trained roofing professionals with decades combined experience in roofing. We have specialists in roof repairs, new roofs, and roof replacements. They are proficient in handling shingle, tile, metal, and flat roofs. They work rapidly without sacrificing quality and will be happy to answer any questions you may have during the process.

Our office staff is well-informed, organized, and has a reputation for excellent customer service. They will assist you through the entire process in a speedy and efficient manner. Our office, located at 1 Enterprise Dr. in Bunnell, FL, is open Monday through Friday from 8am to 4pm. If you have any questions or concerns please feel free to call (386) 263-7906 or stop by in person. We have color samples of tile, shingle, and metal materials at the office which can assist you in choosing the right material and color for your roof, and our office staff will be happy to answer questions and provide input.

Versatility

Unlike some other contractors, we are experienced and proficient in handling all roofing types. We routinely work with asphalt shingle, tile, metal, and flat roofing materials. We will work with you to choose the best materials for your roof and accommodate all your needs. Our experts handle roof repairs, roof replacements, and new roofs for both residential and business properties. Roof size or complexity is never an impediment and our experience allows us to proficiently repair or replace any roof.

No Pre-Payments or Deposits

We pride ourselves on a stream-lined, no fuss process. We provide free estimates and collect no pre-payments or deposits. You will absolutely never be asked to pay anything until we agree on a price and sign a contract. We make the utmost effort to accommodate each customer’s schedule. Our employees operate quickly and efficiently to achieve quality results. Payment for repairs is due only after the repairs have been completed to customer satisfaction. Payment for new roofs and roof replacements is due only after the roof has been completed and passes inspection from the corresponding city or county building office. (Due to the uniqueness of material of each roof, concrete and clay tile roof replacements and new roofs require a payment of half of the final cost upon ordering of the material).

Insurance Services

We work with you and your insurance company. If your roof was damaged by wind, hail, wind-driven debris, lightning, or any other perils covered under your property insurance policy, and you file an insurance claim, we will assist you with the process and work with you and your insurance company’s timeline. If you are unsure if the damage to your roof warrants an insurance claim, we will come out to do a free inspection and advise you on the appropriate steps to take. When you work with us, our experts will meet with your insurance adjuster to identify the damages to your roof. They will review your insurance company’s response to your claim and supplement it, if necessary, again free of charge. We will be with you through every step of the process until you are satisfied with the outcome. There are no extra charges or pre-payments for this process beyond the cost of your roof replacement.

10 Year Labor Warranty

We provide a ten year labor warranty on any new roof or roof replacement. This warranty comes in addition to shingle, tile, and metal manufacturers’ warranties. The manufacturers’ warranties cover any issues that appear in the roofing material, such as factory defects, which arise before the end of the material’s life expectancy. This is why manufacturers’ warranties vary in duration from 15 to 20 to 30 or 40 years depending on the material.

Our 10 year labor warranty instead covers the workmanship of the roof. If your roof leaks, or you find any other problem with the roof during this ten year period, call us and we will send out one of our experienced roofing experts to assess the issue and fix it without charge provided that it falls under the warranty. If the problem turns out to be related to the material manufacturer, we will guide you through that warranty recovery process.

Additionally, we provide a one year labor warranty on any roof repairs. If we repair your roof and a problem arises in the same area within the year, we will come out and service your roof for no charge.

For all the reasons cited above, Florida’s Best Roofing is your best local choice for roof repairs and roof replacements in Palm Coast, Flagler, Bunnell, Ormond, and Daytona Beach!

Nov6

Roofing Blog

Picking a Roof Color

Choosing the color of your roof is an important decision because a new roof is a big investment and a long term one. Roof colors come in a huge variety, especially when it comes to asphalt shingles, the most common type of roof covering. It is necessary to choose a color that you will be happy with for years to come, since a new roof will serve you for decades into the future. There are many ways to approach this choice which we will discuss here. Whether you are looking to sell your property or live in a home for generations to come, making the right color choice now will take you a long way.

Matching

Roof color makes an impact on the aesthetic properties of any house. Matching a roof color with your home’s stucco, siding, and trim is more than just finding a color that will compliment your siding or stucco. The roof’s color should also go well with the rest of the home’s exterior, like trim, light fixtures, and even landscaping. It is also possible that a variety of colors will correspond to the home in these aspects. Then, it is up to the homeowner to make the aesthetically pleasing choice, after consulting the offerings available from shingle or tile manufacturers. Finding the right roofing material color in today’s world of design can be a challenge, as there is such a diverse selection of colors, but with some consideration you can select a color that will please you for years to come.

There is no reason to get overwhelmed with color choices. Although it is an important decision it falls below that of roofing material and its grade. First, you should choose what type of roof covering (shingle, metal, tile, etc.) you need. Next, find a trusted contractor who will replace your roof. At this point a good contractor will help you with the color choice by providing options and samples. There is a great number of roofing material manufacturers across the country, but each contractor will have their preferred few, typically chosen for the quality of their product. The contractor will have samples from their chosen manufacturers that you can then examine to make a decision. Our staff at Florida’s Best Roofing will be glad to offer you advice, and we have plenty of samples to consider in our office in Bunnell, FL.

Here are some design ideas that can help you decide, which apply across the board and provide a starting point:

Effects of Tone – Tints and shades have particular impacts on the perception of architectural design. For instance, light color used on both exterior walls and the roof can make a small building appear larger. This practice also accentuates stark architectural features which you may need to soften or highlight. On the other hand, the use of darker colors on the exterior walls and roof have a dramatic effect. They make a structure and all its aspects stand out, and they harmonize well with neutral tones. Often a combination of the two, such as a light, neutral stucco tone and a dark roof can provide a pleasing result overall.

Medium Blends – Mid-tone or neutral colored roofs match well with almost any exterior. Colors such as gray, tan, brown, and beige go well with most exterior siding or stucco colors and home styles. Since these are so popular, many variations exist upon them that can compliment smaller details on a home, like the trim and exterior light fixtures or doors. The neutrality of these colors is also appreciated by customers looking to renovate their home in expectation of putting it on the market. People are guaranteed to invest more money in a home with a freshly replaced roof, and a neutral color can be pleasant to the greatest number of prospective buyers.

Exact Matching – It is not necessary and often not possible to match a roof exactly with a home’s interior. Siding, paint, and roofing material manufacturers do not coordinate their colors exactly. Moreover, a structure whose exterior, from ground to roof, is only one color is monochromatic and can be displeasing to the eyes. Rather, it is the use of complimentary colors that is best. Staying in the same color family is also best. A dark grey roof looks great on a house with light grey stucco/siding and white trim. Likewise, a home with a yellow exterior is attractive under a medium to darker brown roof. Melding cool tones with warm is usually not advised. This can be quite jarring and idiosyncratic.

Current Trends – In the present day, siding can be found in a range of colors as well as patterns of brick, stone and wood. Darker colors, such as black and dark grey are rather popular. While in the past these put the home in danger of retaining heat and prematurely ageing the roof, new developments in roofing materials removed this as a concern. Also, white and metal roof colors with designs that embrace energy efficiency and coolness can look great while saving on utility costs, particularly in Florida.

Choosing the color for your roof does not have to be arduous or stressful. Keeping an eye on complimentary colors and the design ideas above should help guide you through the process. Give us a call, and we at Florida’s Best Roofing will be happy to provide further assistance.

Oct30

Roofing Blog

How to Extend the Lifetime of your Roof

The roof over your property is a significant investment and one of the most important, protecting everything beneath it. Because roofs are expensive and so integral to the upkeep of the structure, it is important to routinely maintain the roof over your business or home so that it will last as long as possible.

Here we will discuss some aspects of roof maintenance which can extend a roof’s life expectancy. Life expectancy heavily depends on roofing material. Asphalt shingles, the most popular roofing material, have varying life expectancies from about 15 to 40 years, depending on type. Tile roofs can last about 50 years, precluding outside forces and with proper maintenance. Yet, no matter what kind of roof it is, without consideration of the factors below a roof can deteriorate and sprout leaks prematurely.

Roof Ventilation

Have you ever wondered what all those vents are doing up on the roof? Well, they ventilate the attic, which is integral to insulating the structure and preventing premature decay of roofing materials. In an improperly ventilated attic, summer heat can cause temperatures to skyrocket to up to 160 degrees Fahrenheit. This heated air not only heats up the interior and makes it more difficult and expensive to cool the structure, but it also cooks the exterior roof covering from underneath. This can cause pitting, bubbling, and cracking. This can be particularly problematic in the South, where it is hot and sunny so much of the year.

During the cold months, conversely, poorly ventilated roofs trap moisture. This moisture can get into the insulation and dampen the roof sheathing from inside. To avoid these issues make sure that your roof has adequate ventilation and that it is properly installed. Poor vent installation is a frequent cause of roof leaks. If you suspect that your roof may have an issue in this area, contact a roofing professional or inspector.

Gutters

While not all structures have gutters and downspouts, they are an important part of the roofing system. A roof’s lifetime can be increased by the addition and proper maintenance of gutters and decreased by a lack of these. Gutters prevent the structure from constantly being drenched by rain, which is especially important in a state like Florida. Vulnerable sections of the edifice and roof can sustain water damage if frequently exposed to it.

If you do not have gutters, it is a good idea to install them. If you do have gutters, make sure to keep them clear of debris like leaves, branches, and pine needles. Debris clogs gutters and prevents them from functioning correctly. It also weighs down the gutter system, which can lead to damage to the soffit and fascia system. Inspect your gutters a couple of times a year to make sure they are clear and that there is no sagging. This should also be done after all severe weather events. Finally, gutter-guards can help with preventing debris deposits and save you from having to clear the gutters frequently.

Debris Removal

Debris is not only a problem in relation to gutters. It often accumulates on the roof itself, especially in the valleys. In the Palm Coast and Daytona Beach areas it is common to see roofs with pine needles lying in the recessed areas. Is this ok? Definitely not. Anything that shouldn’t be on the roof needs to be removed. Pine needles, branches, leaves, and animal droppings retain moisture, pool water, and add weight. Too much accumulation can even cause structural damage.

Avoid expensive repairs by preventing all that. Remove debris by using a broom to either push or sweep off the roof. Do not use anything with abrasive bristles or a power-washer, since both can damage the roofing material.

Inspect Your Flashing

95 percent of leaks are caused by improperly installed or damaged flashing. Pieces installed around skylights, chimneys, and vents should be checked. It is very important that they are tight and secure. If you notice any gaps, add some sealant or hire a professional to seal it.

Moss, Algae, and Fungus

Moss, algae, and fungus grow on almost any surface exposed to moisture, and the humid environment of our area is perfect for them. Many roofing materials are especially made to prevent moss, algae, and fungus growth, but even these succumb in time in high-moisture environments. To remove these elements, mix equal parts bleach and water in a bucket then spray it on the mold and mildew.

Trees and Branches

Do you have trees growing close to your home or business? Falling branches are always a risk. Additionally, trees that block the sun can encourage moss and fungus growth by preventing the roof from drying fully. Finally, in a hurricane-prone area, trees close to the house can pose a danger. Make sure these are appropriately trimmed or removed altogether.

What Else?

The goal here is preventing problems before they begin or at the least catching them early. Make sure to perform regular roof maintenance and checks after severe weather events. If you notice even a minor problem–address it before it gets worse. This will save you time, money, and protect your home in the long run. Call Florida’s Best Roofing, Inc. or fill out the contact form on our website for a free estimate!

Oct22

Roofing Blog

Roofing and Hail Damage

Hail damage is a frequently overlooked problem which initiates roof deterioration and causes interior leakage problems for homeowners that continue to increase in scope and severity over time unless properly repaired. While hail storms may at first seem like a rare occurrence in a warm-weather climate such as Florida, that is in fact not the case. Typically, several such storms impact the Flagler, Volusia, and St. Johns county areas each year, causing multiple types of exterior damage to homes, particularly to roof coverings.

Unlike wind, which can tear off roofing materials, hail impacts them in less visible ways. This makes it more difficult to detect, mainly because it requires close inspection, which homeowners rarely do, and a knowledge of the signs of hail, which few have unless they are skilled in roofing construction or inspection. Here I will discuss the signs of hail damage, their impact to overall roof integrity, and the steps that should be taken to protect the home after a hail storm.

Hail impacts different roofing materials in different ways. Asphalt shingle roofs, the most common type of roof covering, are most susceptible to hail damage. Even small sized hail will impact asphalt shingles, causing bruising, pitting, and fracturing. Larger hail only causes more significant damage. The most insidious effect of hail on shingles is granule loss. Granules are the sand-like material, made of crushed stone and minerals, that covers all shingles. Once granules are lost, shingles lose their integrity and become susceptible to water damage, which eventually leads to leaky roofs. This process can take several months, but inevitably over time compromised shingles let in more and more water, which first damages the plywood sheathing of the roof, then leaks into the attic, and eventually appears as water stains on interior ceilings.

Tile roofs, both clay and concrete, are hardier against hail storms, but they are still often damaged by hail. Even small hail storms impact tile roofs. The damage in this case appears as crescent shaped fractures at the edges of individual tiles, as star-shaped fractures radiating from the point of impact, and occasionally entire shattered tiles. Tiles compromised in these ways can let in water during following rainstorms, damaging roof sheathing and eventually causing interior leaks. Subsequent weather events only exacerbate these issues as existing fractures grow larger and the tiles become less effective at protecting the structure. Metal roofs are strongest against hailstorms, and while large hail may dent the metal covering, the roof itself is not often compromised.

Another major problem with hail damage is that it is rarely, if ever, localized. Small repairs are not enough to restore a hail damaged roof to its previous intact condition. When a hailstorm hits, the slope(s) facing the storm are often compromised in their entirety. When this is the case, the roof must be replaced in part or across the whole structure to prevent further damage and future leaks. It is important to catch these conditions as soon as possible, because the longer a hail-damaged roof remains that way, the larger the chance of rotten and damaged sheathing and interior leaks, which cause additional expenses to the homeowner. Interior leaks are particularly problematic because left untreated they can invite mold growth, which becomes a health hazard and requires mold remediation services.

There are several ways to spot hail damage. The easiest, of course, is to hire a professional to conduct a roof inspection, however, there are some signs that can be spotted from the ground. Soft metals are often dented by hail. Thus, gutter downspouts, overhead garage doors, and metal fencing show the clearest evidence of past hail storms. Stucco and siding covering exterior walls may also present evidence of impact, particularly in thicker and softer areas such as the trim around windows, doors, and decorative aspects such as quoning on the corners of the structure. Finally, pitting and fracturing on roofing materials can sometimes be spotted from the ground. For instance, asphalt shingles with significant granule damage can seem to shine or sparkle in direct sunlight.

If you suspect that you have hail damage it is important that you consult a roofing professional to protect your home. At Florida’s Best Roofing we would be happy to come out and give you a free estimate. In the case of hail damage, it is also important that you contact your home insurance company. Home insurance policies cover hail damage to roofs, other exterior surfaces, gutters, fences, and any interior damage that may result from compromised exteriors. Make sure that all damage is documented by you, the contractor, or by an insurance adjuster before repairs are made, as doing otherwise may prevent you from getting a full payout. Also, always save all repair invoices after having work done on your property. We at Florida’s Best Roofing will work with you and your insurance company through the entire process to restore your home to its pre-storm condition and prevent further damage. Make sure to pay attention to weather patterns and how they affect your home. Catching damage earlier is always best and if you are in doubt, do not hesitate to call a professional.

#floridasbestroofing, #volusiacounty, #roofing, #bestrooging, #roofingcolor

Oct16

Roofing Blog

Will my home insurance cover repairs to my roof?

As a homeowner you have a home insurance policy to help protect your home from damages and help bring it back to its original condition after such damages occur. Home insurance policies provide coverage for certain events, called perils, and often exclude others: these are all specified in your home insurance policy.

When it comes to roofs, home insurance policies typically cover damages caused by weather. Most frequently, this involves wind or hail damage, although other perils like lightning strikes, tornadoes, and fire are also covered. Indirect damage is also covered, for instance, in the case that wind downs a tree which falls on the roof of a house. On the other hand, some kinds of roof damage are specifically not covered by home insurance. This includes improper installation of roof components, material failure due to manufacturing defects, and normal wear and tear. Wear and tear occurs as a roof ages and affects different materials in different ways. For example, shingles become brittle and metal corrodes. This is why roofs have a limited life expectancy which is typically 15-25 years for a shingle roof and 40-50 years for a tile roof.

Another important part of insurance coverage in places like Florida, and along the eastern seaboard in general, is named storms. Damage caused by named tropical storms and hurricanes is covered in a particular way. Every insurance policy includes a deductible–an amount that the insurance company expects the policy holder to pay out of pocket. This is most frequently $500 or $1000, but can be higher. Damage caused by named storms, however, usually carries its own deductible, separate from all other perils, like a typical windstorm or hail storm. It is referred to as the “hurricane deductible” and is usually 2% of the Dwelling A limit on a policy. The hurricane deductible is always clearly stated in a policy alongside the other perils deductible.

In the case that your roof is damaged by one of the events outlined above and listed in your policy, your insurance will help you pay for your roof repair or even a roof replacement if the damage is extensive or if the roof cannot be effectively repaired, in compliance with state building codes, without replacing the whole roof. To get this process started you will need to call your home insurance company and file a claim as soon as the damage occurs. In Florida, state law says that a policyholder has three years from the date of loss, the insurance term for the date on which damage occurs, to file a claim. It is best, however, to file your claim as soon as you notice damage to your roof in order to prevent further damage in the form of leaks.

Interior leaks are the most obvious evidence of roof damage, but it is best to catch roof damage before these occur. This saves cost down the road and prevents situations that cause homeowners stress and anxiety. It is also important to keep in mind that if interior leaks do occur, you must tell your insurance company about these when calling in the claim, as this damage is also covered under home insurance policies. After the claim is called in, the insurance company will send out an adjuster to assess the damage to both the roof and the interior, if there is any. It is important to set an appointment with the adjuster at a time when someone can meet them, so that the adjuster is able to enter the home and effectively document the evidence of the damage. This is crucial since the insurance company will not pay to repair damage unless they have documentation.

It is frequently difficult or impossible to see roof damage if it has not progressed up to an interior leak. Things like missing or creased shingles and loose or cracked tiles go unnoticed by most homeowners since people do not often spend much time on top of their roofs. Furthermore, even if a homeowner notes evidence of roof damage, he or she will have a hard time pinpointing the exact date on which this damage occurred, unless it follows directly after a hurricane or tropical storm. And yet, this date is crucial when reporting a claim, since claims with incorrect dates of loss are typically denied.

So how do you determine if your roof has damage covered under your insurance policy and the date on which this damage occurred? The easiest and most reliable way is to call a professional. A roofing contractor will be able to identify damage on your roof and pinpoint its cause. At Florida’s Best Roofing, we will inspect your roof for free and advise you whether or not the damage to your home will be covered by your insurance policy. We will also help you figure out the date on which it occurred based on its age and tracked weather patterns in your area. We will also meet with your insurance adjuster to make sure that all evidence of damage is noted. Florida’s Best Roofing services all your roofing needs in Palm Coast and offers free estimates.

Call us today at 386-263-7906.

Apr3

Roofing Blog

Tips For Choosing The Right Roofer

For most of us, choosing a roofing contractor can be an intimidating experience, especially when we have no prior experience with the work ourselves. How do you know you’re getting quality workmanship? Do you even know exactly what it is you want them to do?

Like any other specialised service, it pays to come prepared when you decide to hire someone. Which is exactly why we’ve brought you today’s six tips for choosing the right roofer, so you get exactly what you’re paying for and nothing less.

Go Local

Do a little investigation into commercial roofing options in your area and pick a company that meets your specific requirements. Project specifications. Budget. These are all real considerations and they dictate the way your project will play out.

Choose a company in your area, and you’ll have quick access to them whenever you need their services.

Double Check Their Credentials

Before committing to a contractor, make sure to do a full background check on their licensing and insurance. You’d be surprised how many companies claim to be professional roofers when they just aren’t. This kind of background check is an important part of the process, ensuring you are protected from damages and, ultimately, getting the most out of your project.

Referrals

One of the benefits of going local is being able to easily access the previous customers of your roofers. Ask family members and friends what they’ve heard. Get on Facebook or ask for references that know the people you know. People love to make recommendations to people they don’t have to see at work or family reunions, so if you go further out in your social circles, you’re more likely to hear the truth.

You’ll also want to read reviews. We live in a digital age, and online reviews can give you the exact information you need to make a proper commitment from their reliability to the quality of their service. Turn someone else’s experience to your benefit, and consider visiting the company’s social media accounts for customer feedback.

Don’t Only Focus On The Expense

A commercial roofing company that fits your budget, is obviously important. But it can be easy to get too wrapped up in the cost of the whole project, but you have to consider more than just that. Compare prices with reviews and the services on offer, and try to see the whole picture. There are plenty of roofers out there who charge world-class prices for less-than-stellar service.

Consider Their Experience

Before hiring a roofer, it’s important to know how long they’ve been in the business for. The company must have enough of a background and understanding of the business, so they can handle any situation that may come up during the installation.

Guarantee

As with any other service that impacts the places we live and work, roofing must be guaranteed if it’s going to be trustworthy. A warranty is important in cases where the roofing is done to a poor standard or fails over too little time.

Choosing The Right Roofer

Getting the best service you can from any contractor comes down to knowing what you want, knowing what they can offer, and knowing what other people think about them. With today’s tips, you’ll have exactly what you need to pick the best roofer for the job, every time.

And, speaking of the best roofers: for professional roofing services from a leading name in the Volusia area, get in touch with us on (386) 263-7906, today!

Apr3

Roofing Blog

Choosing The Right Roof For Your Home

Choosing a new roof for your home? It’s more complicated than just picking something out of a catalog. You’re going to want to factor in various considerations in order to make an informed decision. Climate and weather conditions native to your area (and those yearly natural disasters so common in places like Florida). How long you’d like your roof to last vs how much you’re willing to spend. How much roofing material is going to cost, and how that particular material is going to look on your roof.

With so much on your plate, it can be easy to feel completely overwhelmed. Not to worry, though: here are some choice material tips to help you along your way to roofing greatness.

Metal

If you’re looking for durable roofing, metal is probably the best option going for sheer longevity. It is especially strong, refusing to degrade when in full exposure to the elements, from sunlight to heavy rain. Panels are typically completely coated with zinc or aluminum, or galvalume in the case of galvanized steel. This makes them extremely strong, as well.

Metal also has, by far, the highest wind rating of all common roofing materials. It reflects heat more effectively than its competitors, leaving your home warm in the winter and cool in summer.

It’s also better in a lightning storm than you might expect. When a lightning bolt makes contact with a steel roof shingle, the current is easily spread over the surface of the roof without ever entering the house itself.

Metal is also non-flammable, leaving much less risk of extensive damage during a fire.

Asphalt

This is easily one of the more common and most popular options for roofing materials. Asphalt shingles are built for rugged performance, from felt saturated in asphalt, and coated from top to bottom with a weathering layer.

The top is coated with a layer of mineral granules, which help to shield the roof from elements. These shingles are extremely versatile, suiting almost any style of home or roof. They can also be ordered in a variety of styles, from slate grey to simulated wood.

Perhaps one of the main reasons they’re so popular is their low price point. Asphalt shingles are extremely inexpensive, requiring less work and investment to install and repair, over time. The trade in, however, is that they do have a relatively short service life. They’re also not as environmentally friendly, degrading into fine granules over time.

Tiles

Tile roofing is much more durable than building with shingles. Obviously, this depends heavily on the quality and type of material you choose, but concrete and clay tiles are are extremely durable, as well as being fire-resistant. They’re also available in a huge array of colors and styles, making them extremely versatile.

Tiles are difficult to install, and should only be handled by experts. This is a heavy material to use, so it most commonly features in new buildings with very specific weight restrictions.

No matter your target budget is, ideal style, or the climate you live in, the perfect roof system exists for you. Your roof isn’t just some decorative element to try and get past as quickly and expensively as possible. It’s as important to your house’s functionality as the foundation and support columns. Choosing the right material will provide you with better insulation, protection from heat, and less frequent materials. Going the wrong way…well, that can be costly.

Looking for the right materials, installed by some of the leading roofing professionals in Central Florida? Get in touch with Florida’s Best Roofing Inc., today, at (386 )263-7906!

Apr3

Roofing Blog

What To Do When Your Roof Suddenly Leaks Or Is Damaged

When it comes to your home, there’s really only so much you can do against the elements. Build an average home, and pit it against a category 4 hurricane, and there’s a good chance you’ll lose a boundary wall, a few windows, or even a whole section of your home. It’s part of the risk when building a home and a big reason why homeowners’ insurance is so important.

And no part of your home is more susceptible to this kind of damage than your roof. Heavy rain and winds, lightning, hail and acts of God can all damage your roof, causing leaks and internal damage.

So, what’s a homeowner in the middle of a hurricane to do? In the event of such damage, quick action is your first order of business.

Stop A Small Problem From Becoming A Serious Disaster

Before we start, it’s important to note one important thing: in the event of an emergency, never try to fix the problem yourself. Even more importantly, never try to do this during a storm. You could seriously injure yourself, but also cause irreversible damage to your roof.

Call in a qualified roof contractor who is going to have the equipment and expertise to handle your repair job safely and efficiently. Make sure you have an exact understanding of what the problem is before you call, or as close to it as you can get. Be prepared to explain, simply, what the damage is over the phone or in an email, so that they have what they need to give you an accurate cost estimate.

With this information onhand, you now have what you need to decide whether the roof needs repairs, and whether those costs are worth it or if they can wait for the storm to pass by.

What’s Involved

For an emergency procedure, measures will typically include some of the following:

repairing tarpaulins on or underneath damaged roofing
building up damaged chimneys
protecting a damaged utility line

Once conditions have lightened up and everything is dry, once more, your contractor can do a complete assessment of the damage, just in case there was something you missed. They’ll want to isolate a damaged section of the roof and repair it without having to replace the rest of the roof itself.

What To Do When Your Roof Suddenly Leaks Or Is Damaged

As a homeowner, you know anything can happen, but that doesn’t make it any easier to predict. That’s why it’s so important to know exactly what to do in the event of a sudden leak or unexpected damage, to minimize damage and any potential risks to yourself.

Always remember: trying to handle an emergency repair on your ceiling on your own could be dangerous, not just to yourself but also to your roof. Isolate the damage, contain any of the moisture that makes its way inside, and get on the phone with someone who knows what they’re doing.

Looking for professional help with emergency roof repair work? Visit Florida’s Best Roofing Inc, or get in touch with us on (386)263-7906, today!

Apr3

Roofing Blog

How to Qualify Your Roofing Contractor?

An important factor in the success of any construction project is in choosing the right contractor. Qualified, professional contractors have the background and experience in the industry to know what they need to turn out in order to guarantee the outcome of a homeowner’s project.

If you take the time to understand your contractor before giving them the contract, you save a lot of potential issues and wasted time in solving unexpected problems. Professional contractors work with a sense of pride, so expect them to discuss your options, their previous work, and and any and all references.

Before making an appointment, decide whether you’re truly qualified. And the best way to figure yourself out in those situations? Well, you can start by answering some of the following questions:

Does Your Contractor Have A Permanent Office?

The selection process can be grueling when it comes to roofing contractors. This means that you need to get the basics taken care of, early on. Start with the following question: do they have the resources to rent and maintain a permanent office? If your contractor isn’t permanently established somewhere, how can they guarantee they’ll complete your roof under deadlines or unexpected developments?

Do They Have Legitimate Insurance?

Trying to decide on a new contractor? You’re going to want specific information about their coverage in the event of an accident or some sort of roadblock. They’ll need to verify your coverage, with names and phone numbers for their provider.

Are They Licensed, Registered, and Part of a Trade Association?

Never trust a contractor just because they can show you their license. You might not expect it, but licensing requirements are actually pretty minimal.Not only that, but the actual laws concerning them aren’t usually very strict.

Ask if they are a trade association member. Then ask for contact details, and make sure to actually reach out and contact the association to confirm their membership.

How Long Have They Been A Part Of The Industry For?

Age within the business speaks volumes, so make sure to get a clear idea of how long they’ve been roofing for. Many businesses will artfully sidestep this question, but don’t let them distract you.

If your contractor has been in the business for fewer than five years, it may indicate some instability. This is why 90% of businesses fail within their first five years of operation. Check their references carefully for long-term validity, and make sure to ask about their older projects if and when you contact them.

How Have They Historically Handled Complaint Resolution?

If a contractor tells you they have never had a complaint during their time in business, do yourself a favor and reject them outright. Every business deals with complaints. It’s not about getting out without any complaints, but about how you handle those complaints.

Ask your potential contractor about the complaints they’ve had, how they handled them, and how they would handle a hypothetical complaint, as well.

Looking for more great insights into the roofing industry? Check out some of our other expert blog content, or get in touch with us today, and find out how Florida’s Best Roofing, Inc. can transform your next roofing project.